・TRAKTOR PRO 2 is a product of Native Instruments. (1) Audio Setup In principle, Pioneer is not in the position of answering any inquiries on the ・Audio Device: PIONEER DDJ ASIO (For Windows users) usage of the software itself. Using traktor scratch pro 2 with ddj-t1 and 2 turntables??. connect both turntables to the inputs Ch A & Ch B on the Traktor Audio 6. Output Routing. Depending what you have chosen and connect the headphones DIRECTLY to the headphone output of the Traktor Audio 6. The DDJ-T1 will now be just a midi controller for all Deck. Restart TRAKTOR, then select the DDJ-ERGO at Output Monitor and Output Master under Output Routing. Net Number: 100 Q7 When the remix (sample) decks’ slots are set to the one-shot mode and the DDJ-ERGO’s PLAY button is pressed. Jan 20, 2012 This week Dubspot Digital DJ instructor DJ Endo breaks down everything you ever wanted to know about Native Instruments’ Traktor 2 preferences. In this exploration of Traktor’s inner-workings, Endo explains not only what different features do but also why and how they work the way they do. Traktor Pro Preferences Explained. ■ First, turn on the power of DDJ-WeGO2. Then, run the Traktor PRO2 software. If you launch them in reverse order, Tracktor PRO 2 may not be controlled by DDJ-WeGO2 or no sound may be output. ■ If you launch them in reverse order, close TRAKTOR PRO 2 and turn off the power of DDJ-WeGO2.
- This topic has 10 replies, 1 voice, and was last updated 7 years, 9 months ago by .
Ddj Ergo Dj Controller Driver
I have traktor pro 2 installed and my hercules e2 controller works fine with it, all controls are fine but no sounds played through traktor play.
Under Audio setup i have the following settings:
Audio device: ASIO4ALL v2
Sample rate: 24000Hz
Latency: 512Then under the ‘Built in soundcard’ bit i have ASIO4ALL selected again. The only other choice being something called” Conexant 20561 smartaudio ( (Wassapi) (Shared mode))”
I have no idea what to do with input & output routing, but have had no luck with just guessing. could really use some help people. if you need any more info, let me know. thanks
On Audio Setup, select “ASIO4ALL” for audio device. Then, on Output Routing, select “Internal” for mixing mode, on Out Master select 1: Front Left, then 2: Front Right. Output Monitor should be 3: Back Left, then 4: Back Right.
Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man
So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.
Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.
If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man
So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.
Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.
If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
Degenerate, post: 21893, member: 2367 wrote: Alvin, in output routing the only options available for anything under the output routing tab is, “HD Audio digital out 1” and “HD Audio digital out 2”. Oh and im using a hercules e2 mixer so i’d need to use external mixer right? cheers man
So I’ve checked your controller the Hercules E2, and learned that it doesn’t have a built-in soundcard. And, the computer that you are connecting to is using a Digital-Out interface, which means your ordinary 3.5mm will not work with it. You will need a S/PDIF is a digital audio interconnect to RCA cable to be able to connect it to an external mixer or speakers.
Try using Conexant 20561 smartaudio ( (Wassapi) (Shared mode)) as your audio setup and use “internal” in your output routing select “anything” that is available on your drop down list and see if any sound is produced in your computer.
If it still doesn’t work, then your computer’s soundcard doesn’t support external audio routing, you may need to buy a DJ soundcard like one of these: http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
3D 5.1 soundcards will work as long as you have two separate outputs. But, if you want to connect it to high-powered mixers and speakers, then I recommend buying a DJ soundcard from numark or native instruments. That way there would be no distortion if you pump up the volume. Vst music software free download.
- Posts
Pioneer Ddj Ergo Asio Driver
- The forum ‘DJing Software’ is closed to new topics and replies.